OS3 HO LITE Slot Car Controller. Runs Most HO cars.

Description

From the original Manufacturer, One Stop Slot Shop, WE offer up our OS3 HO Lite electronic slot car controller. It will run all HO cars from Tjets to 6 ohm Super Stock magnet cars. This includes AutoWorld, Mega Gs, Super G's, and Stock Tyco/Lifelike/AFX/Wizzard/Viper 6 ohm cars. It will also run Aurora Thunderjet, AFX, Magna-Traction, Super MT and G plus cars. It works without the brake wire being hooked up for two-wire tracks.
For Positive-Gate Tracks. (Positive Gate tracks have the passenger side rails connected to the ground/negative wire of the power supply and use a variable positive voltage applied to the driver's side rail).  All commercial HO tracks (AFX, AutoWorld, Tyco, Mattel, Lifelike, Aurora, Atlas, Eldon, Cox and almost ALL routed tracks are Positive Gate tracks.  The HO Lite comes with alligator clip connectors.  For Plastic Tracks, you will need to create a connection between the clips and the track.
Why buy a resistor controller that can only run one type of car when you can get an electronic version that can run what all of the various ohm resistor controllers can run, combined, and even more that they can't!!
OVER 2000 OS3 Controllers being used all over the world
This listing is for One(1) OS3 HO Lite Controller in a Clear Handle with Red, Black and White wires ONLY.
All Lite Series controllers feature the following:
OS3 Handle
New Handle designed by OS3 to match the grip and feel of a Parma handle while allowing more internal room and a better mounting system.   The two sides grip together with a positive positioning system that makes assembly a snap.   No requirement to align the sides before tightening the screws or worrying about the sharp edges from a worn mold.
OS3 Trigger
Super strong rounded edge Nylon trigger.   Similar in shape to the Parma trigger but a lot more comfortable on your finger.
Super Flexible Wire
38" of highly flexible 16 gauge silicon coated wires are used on all controllers and are terminated with colored insulators over steel clips. The color-coded wire makes it easier to ensure the correct wire makes it to the correct post.
Compact Design
Transistor-in-the-Handle design allows the controller to be light and compact while also reducing the sharp edges and cumbersome weight associated with Transistor-on-the-Wires designs.
Pivot Rivet
Redesigned rivet removes the slop in the bushing and eliminates the need for bearings.  It also locks into the frame to prevent the trigger from drifting in position.
Protected Circuitry
An external Mini Automotive fuse is included to protect the controller, track wiring and Power Supplies.   The fuse is conveniently tucked into the top of the controller where it can be easily checked, quickly replaced and not accidentally dislodged.  The electronic circuit board and Sensitivity knob is also tucked inside the controller to protect it damage when dropped. The controller can be laid down anywhere without risk of having the circuitry contact the track and cause damage to the controller.
These features makes it great as a "Rental" or "House" controller, the controller you lend your guests instead of your OS3 HO ALL Pro or OS3 HO ALL Pro ELITE.
Nickel-Plated Board
40 Bands for fine control.   Resists wear while providing good electrical contact.
Flexible Wiper Arm
Prevents the need for complicated and expensive hinges or bearings while performing the same function of maintaining positive contact with minimal pressure to the wiping surface.
Aluminum Frame
Redesigned frame serves as a heatsink and houses all components reducing overall weight.
Our
HO Lite
is an HO Scale electronic controller featuring all the basics of the Pro Series controllers. It is intended for use with All HO cars up to Super Stock magnet cars (Basically all HO cars except Inline Modifieds, Neo and RO). It features:
-  Adjustable Sensitivity.
A compact potentiometer p
rovides a wide range that is set to run all HO cars from Tjets to 6 ohm magnet cars running up to 20V.
-  ON/OFF Brakes
.
Brakes are available when the
RED
wire is conn
ected .
HO Lite Controls
Sensitivity Knob
- Fully CCW is the lowest sensitivity for the slowest starting speed.  Fully CW is the highest sensitivity for the highest starting speed.
Brakes
- Connecting the
RED
wire provide Full Brakes at 0 ohms. Disconnecting the
RED
wire provides NO Brakes.
Shipment by USPS First Class mail.