Throttle Lever & Cable for Troy-Bilt Horse Tiller (GW-9015, 9015, GW-9240, 9240)

Description

Throttle Lever and Cable Assembly for most Troy-Bilt Horse but NOT ALL -
Length:
53-5/8"
Replaces Part Numbers:
GW-9015
9015
GW-9240
9240
Length:
53-5/8" Jacket
Wire travel is approximately 1 1/4"
Mounting holes center to center are 2" one hole is oblong to allow a bit of adjustment.
Cable can be modified to make shorter by removing wire, cutting jacket and wire to your needs.
Lock nut on lever to control friction desired
***  Please check the length of your cable before you buy  ***
We have had few customer complaints that it is too short for a Series 1 machine.   We have used on all the older horse for many years without incident but the horse had many small revisions and its possible variations are out there.
We also cannot account for motor swaps and all the home grown engineering that has been done to these tillers, many are 30 or more years old and have been used, abused, reworked and modified.    Horse models were made for a long time and had revisions and changes that are hard to document.
The spacing on the welded tab on some models is a slightly different spacing then our cable.   You may need to oblong, grind or drill out the holes to get a good fit.  On some it fits perfectly and not on others.   We have no control over these variations.   Ordering an OEM part from MTD will not solve this issue of variations.
It is our expectation is that you have a good idea of what you need,  we try to ship very fast at the best price we can offer you.     If you have a problem or a suggestion of how to make our listing better,  please contact us we want you to have a good experience, fast ship and a great deal from us on Ebay.
THERE IS A 1 STAR REVIEW ON OUR ITEM, NOTE IS WAS NOT BOUGHT FROM US.
AFTER 100s OF SATISFIED CUSTOMERS WE GET NEGATIVE FEEDBACK BECAUSE THE CABLE IS TO SHORT ?   I GUESS THE LARGE RED 53 5/8" LENGTH AND THE WARNING TO MEASURE BEFORE YOU BUY IS NOT SUFFICIENT.
WE CANNOT MAKE CUSTOMERS READ THE LISTING BEFORE THEY BUY - IT IS A SHAME THAT SOMEHOW THAT IS PERCEIVED TO BE OUR FAULT.     MANY OF THE 4 SPEED MODELS USED A DIFFERENT CABLE ASSEMBLY ALL TOGETHER - IT HAD A LEVER SIMILAR TO MTD PUSH MOWERS.   ON SOME REVISIONS THE HANDLE BARS STILL HAD THE TABS TO USE THIS STYLE CABLE EVEN THOUGH THEY CAME WITH A DIFFERENT CABLE.
HORSE MODELS HAVE HAD MANY REVISIONS AND SMALL VARIATIONS -  WE CANT SAY IT ENOUGH -
PLEASE MEASURE YOUR APPLICATION BEFORE YOU BUY
.
IF YOU NEED A LONGER VERSION OF THIS CABLE PLEASE SEE OUR OTHER LISTINGS
WE HAVE A 71 1/2" VERSION AS A SOLUTION  See Listing :
292562675771
Cutomers Fitment tips :
9/9/19 - Troy-Bilt Horse with the Kohler Magnum M8T engine requires longer cable in our listing
292562675771
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser.